Table of Contents
Advertisement
1
BEFORE USING THE SR-VPN1
1. Panel description (continued)
M Front panel (continued)
y [VPN] ...........................
u [PPP] ...........................
i [BACKUP] .....................
o [USB] ports ..................
(USB2.0×2)
q
w
e
r
t
Lights green:
An IPsec connection is established.
Lights green:
PPP is established.
Lights green:
The backup line is communicating.
CAUTION: Turn OFF the power before inserting or removing the USB flash
drive.
About the USB flash drive
• A USB flash drive such as one with biometric authentication,
or one with password protection is not supported.
• Turn OFF the SR-VPN1's power before inser ting or
removing the USB flash drive, to prevent data corruption.
• Either one of the USB slots accepts the USB flash drive, but
insert only one USB flash drive at a time.
• Insert the USB flash drive securely.
• NEVER remove the USB flash drive or turn OFF the
SR-VPN1's power, while transferring data. It will cause data
corruption, or damage the USB flash drive.
• After the firmware updating is finished, check the firmware
version on the setting screen to verify that the update was
correctly done.
• When importing setting data from the USB flash drive to
the SR-VPN1, the originally programmed setting data is
automatically saved as "bakdata.sav" in the USB flash drive,
as a backup.
1-3
y
u
i
o
Advertisement
Chapters
Table of Contents
