Icom SR-VPN1 Instruction Manual page 132

6
MAINTENANCE
5. About the Automatic Restore using a USB flash drive (continued)
[How to clone the settings and the firmware using a USB flash drive.]
A USB flash drive can contain settings and firmware files for different SR-VPN1s.
You need to create folders, whose names are each SR-VPN1's LAN MAC address (☞Pv, P5-5), and save the firm-
ware and settings files to each folder.
Example: The SR-VPN1's LAN MAC address is "0090C7000001."
• Create the folder named "0090C7000001" in a USB flash drive, and then save the firmware and settings files to
the folder.
Insert the USB flash drive, into the SR-VPN1. Then the setting backup file is automatically created in the
"0090C7000001" folder.
The firmware and settings files are loaded from the "0090C7000001" folder.
Note: The firmware and settings files in any other folders are not loaded.
• If inserting the USB flash drive (Figure 1 and 2 in the picture below) into the SR-VPN1 (0090C7000002), the set-
ting backup file is automatically created in the root directory as there is no folder whose name is SR-VPN1's LAN
MAC address.
The firmware and settings files in the root directory are loaded.
Create the "0090C7000001"
folder in the USB flash drive,
and then save the firmware or
settings file to the folder.
I f t h e r e i s n o f o l d e r f o r t h e
S R - V P N 1 ' s M A C a d d r e s s ,
firmware and settings backup
f i l e s a r e s a v e d i n t h e r o o t
directory.
• You can create plural folders
and save the files into them.
(Example: "0090C7000001,"
"0090C7000002,"
"0090C7000003")
Files in the "0090C7000001"
folder.
Figure 1
Figure 2
6-11
Backup file's updated date is not
displayed.