Table of Contents
Advertisement
6
MAINTENANCE
6. How to restore the configuration using a USB flash drive (continued)
Loading the settings from the USB flash drive (continued)
5
When the all data has been loaded into, the [MSG]
LED blacks out and the SR-VPN1 automatically re-
starts.
Verify that the [PWR] LED lights green, then turn
OFF the power.
Then remove the USB flash drive from the SR-
VPN1.
Note: The SR-VPN1's old setting data is automatically
saved in the USB flash drive as "bakdata.sav."
Note: NEVER remove the USB flash while the SR-
VPN1's power is ON.
NOTE:
If "Disable" is selected in the [USB Flash Drive] item on the [USB] screen, this function cannot be used. (☞P5-72)
w
Remove the USB flash drive
6-14
q
Turn OFF the power
Advertisement
Chapters
Table of Contents
