Icom SR-VPN1 Instruction Manual page 39

5
ABOUT THE SETTING SCREEN
3. [Information] Menu (continued)
M IPsec Status
Displays the details of each IPsec tunnel.
K
q
K
w
K
e
K
r
K
t
K
y
K
u
K
i
K
y
K
u
(This is an example.)
q Uptime ........................
w Session ........................
eIKE Version ..................
r Local IP Address .........
t Local IP Address .........
Phase1 (ISAKMP SA)/Phase2 (IPsec SA)
y Integrity Algorithm ......
u Encryption Algorithm ...
i DH Group .....................
Site A
The elapse time (in second) from the time when the connection has been made.
The operation mode of the IPsec IKE.
• Initiator
The SR-VPN1 is the Initiator.
• Responder
The SR-VPN1 is the Responder.
The version of the IKE used for the tunnel.
The WAN IP address of the SR-VPN1 (Site A in the illustration below).
The WAN IP address of the SR-VPN1 (Site B in the illustration below).
The authentication algorithm used for the IKE phase 1/2.
The encryption algorithm used for the IKE phase 1/2.
The DH group used for the IKE phase 1.
IPsec tunnel
SR-VPN1
An IPsec connection
IP
Network
5-9
[Information]–[VPN Status]
Site B
SR-VPN1
(Peer)