Table of Contents
Advertisement
6
MAINTENANCE
7. How to update the firmware using a USB flash drive (continued)
Updating the firmware (continued)
8
All LEDs light while the firmware update is in progress.
Note:
NEVER remove the USB flash drive or turn OFF the SR-VPN1's power
Lights in orange while updating the firmware.
9
When the update has been finished, the SR-VPN1 automatically reboots.
• After rebooting, verify that [PWR] lights green, and then turn OFF the power.
Note:
NEVER remove the USB flash drive while the SR-VPN1's power is ON.
w
NOTE:
After the firmware updating is finished, check the firmware version on the setting screen to verify that the update was cor-
rectly done.
q
Turn OFF the power
Remove the USB flash drive
6-16
Advertisement
Chapters
Table of Contents
