Icom SR-VPN1 Instruction Manual page 3

Vpn router
Hide thumbs Also See for SR-VPN1:
Table of Contents

Advertisement

INTRODUCTION
FEATURES
• Secure, protected IPsec tunneling connecting up to 32 locations.
• Proven to work with IDAS multi-site systems.
• Supports FTTH, xDSL line. (WAN)
Note: An interface converter is separately required.
• 10/100/1000 BASE-T Ethernet ports.
• 4 [LAN] ports with a switching HUB.
• WAN Failover function.
Dual WAN ports for fail safe configuration, maintains VPN connection if either of the two network connection is working.
Notes:
- This function is disabled as the default.
- When the same network address is assigned to the WAN1 (Main line) and WAN2 (Sub line), this function doesn't
properly work.
- Icom is not responsible for any result of using this function.
• Supports SNMP.
• Access restriction with the IP Filter function.
• Automatic Restore using a USB flash drive
• Multicast packets (IPv4) will reach every other end point.
Note: For only VE-PG2 and VE-PG3.
ii

Advertisement

Table of Contents
loading

Table of Contents