Cleaning The Flextube And Dome - ReSound Azure BTE AZ70-DVI User Manual

Cleaning the Flex Tube and dome
The tube and the dome should be cleaned regularly:
1. Remove the tube from the instrument before cleaning by
unscrewing it
2. Use a damp cloth to clean the tube
and dome on the outside
3. Use the black cleaning rod to "push"
any debris out of the tube. The clean-
ing rod should be inserted where the
tube attaches to the instrument and
pushed all the way through the Flex
tube and out through the dome
Note!
It is not recommended to submerge or rinse the tube and dome with
water, as water can close the tube. If this should occur, it will prevent
sound coming through the tube, and may be harmful for the instru-
ment's electronics.
The tube and dome should be changed every third month or sooner if
the tube becomes stiff or brittle.
20
How to Mount the dome
We recommend that your hearing care professional changes the dome
for you, since failure to change the domes in accordance with the
instructions could result in injury. If you choose to change the dome
yourself:
1
1. Push the dome over the grooves on the tube to mount it (1) + (2)
2. Make sure that it is securely fastened
2
21