Changing The Light Bulb; Grease Filter - Zanussi ZB 350 Instruction Booklet

Synthetic Paper Grease Filter
The filter has saturation indicators, which are
small squares made from a series of dots.
When the white paper inside the squares
becomes saturated with grease the coloured
dots start to run and spread across the paper,
indicating that the filter has reached saturation
point and must be replaced.
The synthetic paper grease filter
cannot be cleaned.
It must not be washed.
To Replace the Synthetic Paper
K

Grease Filter

1. Open the visor.
2. Press inwardly on the two slide catches
and lower the grille to the stop position.
Raise the front edge of the grille through
a 45° angle until it detaches itself from the
guides.
3. Carefully ease out the metal wire
retaining clips.
4. Clean the metal grille and clips before
replacing the filter.
Handle the wire clips with care and
keep away from children as they have
sharp points.
This appliance can be a fire hazard if
the grease and charcoal filters are not
replaced as recommended.

Changing the Light Bulb

The bulb should be replaced with a 220-240
volt 40 watt clear cylindrical shape bulb with a
small (E14) screw thread.
Replacement charcoal filters, grease filters
and light bulbs can be obtained from your
local Service Force Centre.
7