Timed Override (Tov) Mode; Locking Or Unlocking Modes - Trane Thermostats Installation And Operation Manual

Operation

Timed Override (TOV) Mode

During normal operation, the thermostat controls the HVAC equipment according to the schedule
that is programmed into it.To permanently change the temperature setpoint or fan setting, make
the change in the programmed schedule (see
be used to temporarily change the current settings without making any change to the schedule.
To start a temperature setpoint override:
1. Press
2. Within 5 sec of
3. Press and release
4. When you reach the function you want to change as part of the override, press
5. Once you have specified all needed changes, press and hold
6. Press and hold

Locking or Unlocking Modes

You can independently lock and unlock the system, fan, and schedule change modes. When a lock
is activated, users cannot change the current mode or schedule settings. If you attempt to make a
change,
To lock a mode:
1. Enter the mode you want to lock:
2. Make sure that the mode or schedule you entered is correct; if not, make the necessary changes.
3. Simultaneously press and hold
To unlock a mode:
1. Enter the mode you want to unlock:
2. Simultaneously press and hold
40
or .The current temperature setpoint appears.
Step 1, press
thermostat enters timed override mode, giving you the opportunity to specify the other
parameters of the override.
or
cooling temperature setpoints, fan mode, override duration, or occupancy setting.
the changes.
and exit.
and
without enteringTOV mode.
flashes on the display.
• > > for system mode
• > > for fan mode
• > > >
display.
• > > for system mode
• > > for fan mode
• > > >
"Scheduling, " p.
to raise the setpoint or
(or , which has the same function as
for 2 sec from the home screen or when inTOV setup mode to exit
for schedule mode (programmable thermostat only)
and for 4 sec. When the mode is locked,
for schedule mode (programmable thermostat only)
and for 4 sec. When the mode is unlocked,
36). However, a timed override can
to lower the setpoint.The
) to scroll to heating or
and
for 2 sec or wait 15 sec to save
appears on the
disappears.
BAS-SVX36C-EN
make