Applying Power - Trane Thermostats Installation And Operation Manual

Applying Power

Applying power to the thermostat will initiate a power up sequence.
1. The full screen appears for 1.5 seconds.
2. The firmware version appears for 1.5 seconds:
3. Power up tests are performed.
Figure 33. Home screens
BAS-SVX36C-EN
• On the programmable thermostat, the firmware version shows in the HH:MM digits.
• On the non-programmable thermostats, the digits are split between the top and bottom
regions of the screen: the most significant digits are at the top.
• If an error is detected, an error code appears (see
• If no errors are detected, the home screen appears (see
Mo
. .
AM
Programmable
thermostat
Non-programmable
thermostats
"Error Codes, " p. 43).
Figure 33).
Installation
25