Trane Thermostats Installation And Operation Manual page 30

Configuration
Table 6.
No.
0233
0240
0241
0260
0270
0271
0300
(1) Only available if option #0125 is set to 4.
(2) See
(3) See
(4) If an external sensor is attached to the S1 and S2 terminals, it must be 10K
(5) Only available for heat pump systems with more heat than cool stages and remote outdoor sensor. A 5 °F (2.5 °C) dead
(6) Only applies to systems with heat stages.
(7) Only applies to systems with cool stages.
(8) Only applies to control temperature and display temperature for internal and indoor remote sensor. Does not apply to out-
(9) See
(10)Only available when option #0151 is set to 1.
30
Installation Options for 3-Heat/2-Cool Programmable Thermostat (continued)
Name Default
Scheduling mode 0
day options
Heat 90
temperature
(6)
range stops
Cool temperature 50
(7)
range stops
Temperature 0
(8)
display offset
Extended fan-on 0
(9)(10)
time heat
Extended fan-on 0
(9)(7)
time cool
Restore factory 0
defaults
"Heat and Cool Cycling Rate," p.
"Deadband," p. 41.
band between options #0220 and #0221 will be enforced automatically.
door temperature for display.
"Extended Fan-on Time (Heat or Cool)," p.
Opts. Descriptions
0 1 day - Mo-Su share the same schedule
1 5+1+1 days - Mo-Fr share a schedule; Sa and Su each have an independent
schedule
2 5+2 days - Mo-Fr share a schedule; Sa-Su share a schedule
3 7 days - Each day has an independent schedule
40 - 90 40° F to 90° F
4 - 32 4° C to 32° C
50 - 99 50° F to 99° F
10 - 37 4° C to 32° C
-3 –3° F (–1.5° C)
-2 –2° F (–1.0° C)
-1 –1° F (–0.5° C)
0 None
1 1° F (0.5° C)
2 2° F (1.0° C)
3 3° F (1.5° C)
0 Off
90 90 sec
0 Off
40 40 sec
0 No - do not restore
1 Yes - reset all installer options to default except calendar, and system
selection - options 0120-0122 and 0125-0130 do not reset.
41.
42.

negative temperature coefficient.
BAS-SVX36C-EN