Trane Thermostats Installation And Operation Manual page 28

Configuration
Table 6.
No.
0140
0150
0151
0153
0160
0161
0162
0163
0164
0165
0170
0180
0181
0182
0190
0210
28
Installation Options for 3-Heat/2-Cool Programmable Thermostat (continued)
Name Default
Schedule options 1
TOD/Economizer 0
output
(terminal A)
Heat fan 0
operation
Reversing value 0
O/B
CPH 1st stage 3
(2)
compressor
CPH 2nd stage 3
(2)
compressor
CPH 1st stage 5
conventional
(2)
heat
CPH 2nd stage 9
conventional
(2)
heat
CPH for auxiliary 9
(2)
heat
CPH for 9
emergency
(2)
heat
Continuous 0
backlight
Changeover 1
(3)
Deadband 3
Minimum 5
compressor off
time
Power supply 0
frequency
Temperature 0
sensor selection
Opts. Descriptions
0 Non-programmable
1 Programmable
0 Unused
1 TOD energizes terminal A during occupied period, not during
unoccupied period.
2 Economizer energizes terminal A during a call for cool
0 System controls fan
1 Thermostat controls fan
0 O/B terminal energized in cooling
1 O/B terminal energized in heating
1-5 Cycles per hour for 1st stage compressor - only for systems with cool or heat
pump stage - also changes 2nd stage cool default CPH
1-5 Cycles per hour for 2nd stage compressor - only for systems with two cool or
heat pump stages
1-10 Cycles per hour for 1st stage conventional heat - only for systems with heat
stages - also changes 2nd stage heat default CPH
1-10 Cycles per hour for 2nd stage conventional heat - only for systems with two
conventional heat stages
1-10 Cycles per hour for auxiliary heat - only for heat pump systems with more
heat than cool stages
1-10 Cycles per hour for emergency heat - only for heat pump systems with more
heat than cool stages
0 Backlight "ON" time is limited
1 Backlight does not turn off
0 Manual changeover (heat/cool/off) - manually changeover the thermostat
between heat, cool, and off
1 Auto changeover (heat/cool/auto/off) - manually changeover between heat,
cool, and off, or select automatic changeover
2 2° F (1° C)
3 3° F (1.5° C)
4 4° F (2.0° C)
5 5° F (2.5° C)
6 6° F (3.0° C)
7 7° F (3.5° C)
8 8° F (4.0° C)
9 9° F (4.5° C)
0-5 Minutes for compressor off time - for systems with cool or heat pump stages
- (Minutes specified here are added to the 5 min base off time.)
0 60Hz
1 50 Hz
0 Internal for H/C - display can show only local temperature and setpoint
1 Internal for H/C - remote (connected to S1 & S2)
show local and remote temperature, and setpoint
2 Internal for H/C, remote (connected to S1 & S2)
auxiliary lockout; display can show local and remote temperature, and
setpoint - (Disabled for conventional systems.)
3 Remote (connected to S1 & S2)
remote indoor temperature and setpoint
(4)
for display - display can
(4)
for compressor and
(4)
for H/C, internal disabled; display can show
BAS-SVX36C-EN