Trane Programmable Thermostat X13511537-01/BAYSTAT150A/THT02774 Setup Instructions

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment.

Time Setup

To change the current time:

1. From the Home screen, press , , , , , .
2. Press , , or to scroll between hours and minutes.
   
3. Press to increase or to decrease the hour or minute.
   
4. Press and hold for 2 seconds or wait 10 seconds to Save and Exit.

System Mode Setup

To set the system mode:

1. From the operating screen, press , . The current mode flashes.
2. Press or to select a mode.
   
   Note: Not all system choices may be available depending on the system configuration 0130.
3. Press and hold for 2 seconds or wait 10 seconds to Save and Exit.

Fan Mode

The fan mode is displayed only on systems configured with the fan enabled.

For systems configured with a fan, the fan setting is shown on the display. In addition, the setting also appears on the display when pressing , , from the Home screen.

The fan mode setting can be overridden by pressing or when the fan mode flashes. Press and hold for 2 seconds or wait 10 seconds to Save and Exit. Refer to the section, "Timed Override (TOV)".

When this thermostat is configured in programmable mode (0140=1), then changing the Fan Mode from the Home screen puts the thermostat into Timed Override (TOV) and is only temporary. The fan goes back to the schedule setting after the TOV timer expires.

Timed Override (TOV)

A timed override can be used to temporarily change the heating setpoint, cooling setpoint, fan mode, and/or occupancy setting from the programmed schedule. The override can be set for up to 99 days and up to 23 hours.

To enter a timed override:

1. From the operating screen, press or 2 times. The thermostat enters timed override mode with the hourglass and setpoint flashing.
2. Press or press or to move from either left or right through the selections. Some of the selections may not be available depending on the system type.
   
3. Press or to change the value of the currently active (flashing) selections. Repeat steps 2 and 3 for the desired settings.
   Note: To reach the DAYS setting, the user must press from the hours setting.
4. Press and hold for 2 seconds or wait 10 seconds to Save and Exit.
   Note: The thermostat will return to the scheduled operation when:
   • the override time expires, or
   • pressing and holding and for 2 seconds.

When in timed override mode, if the system selection is changed (EmHeat, Heat, Cool, Auto, OFF), this change will take the thermostat out of TOV mode.

Whenever the thermostat is in TOV mode, a solid hour glass ( ) indicator displays at the bottom of the screen.

Create or Edit a Schedule

To create or edit a schedule:

1. Press , , , , .
   Note: Each button shown above must be pressed within 10 seconds of the previous button. Once the user is in Schedule Change Mode, each button must be pressed within 45 seconds of the previous button in order to stay in Schedule Change Mode.
2. Press or to select the day(s) and to continue.
   
3. Press or to select the period and to continue.
   
4. Press or to change the StartTime and to continue.
   
5. Press or to change the Heating Setpoint and to continue.
   
6. Press or to change the Cooling Setpoint and to continue.
   
7. Press or to select the Fan Setting and to continue.
   
8. Repeat steps 2 through 7 for each day (see step 2) and period (see step 3).To exit Schedule Change Mode, wait 45 seconds or press and hold for 2 seconds to Save and Exit.

Possible Scheduling Configurations (configuration option 0233):

• 1 day [default]; MoTuWeThFrSaSu (all days share a schedule).
• 5+1+1 days; MoTuWeThFr Sa Su (Monday through Friday share a schedule, Saturday and Sunday are each separate schedules).
• 5+2 days; MoTuWeThFr SaSu (Monday through Friday share a schedule, Saturday and Sunday share a schedule).
• 7 days; Mo Tu We Th Fr Sa Su (Each day has a separate schedule).

Note: Use the worksheet for planning or recording schedule settings. Default settings are ENERGY STAR^® compliant.

4-Period defaults		6:00 am	70°F (21.0°C)	78°F (25.5°C)	Auto
		8:00 am	62°F (16.5°C)	85°F (29.5°C)	Auto
		6:00 pm	70°F (21.0°C)	78°F (25.5°C)	Auto
		10:00 pm	62°F (16.5°C)	82°F (28.0°C)	Auto
2-Period defaults		8:00 am	70°F (21.0°C)	78°F (25.5°C)	Auto
		10:00 pm	55°F (13.0°C)	85°F (29.5°C)	Auto
Mo		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
Tu		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
We		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
Th		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
Fr		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
Sa		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
Su		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto
		:	°	°	Auto

Legend of Symbols

Morning	Day	Evening	Night	Time	Heat	Cool	Fan	ON

More information: https://www.trane.com/stat

Trane optimizes the performance of homes and buildings around the world. A business of Ingersoll Rand, the leader in creating and sustaining safe, comfortable and energy efficient environments, Trane offers a broad portfolio of advanced controls and HVAC systems, comprehensive building services, and parts. For more information, visit www.IRCO.com.

Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice.

© 2012 Trane. All rights reserved.
X39641168-01B 13 Mar 2012
Supersedes x39641168-01A 03 Dec 2009

We are committed to using environmentally conscious print practices that reduce waste.