Emerson MVME6100 Series Installation And Use Manual page 60

Functional Description
Table 4-1 MVME6100 Features Summary (continued)
Feature
On-board Peripheral Support
PCI/PMC
VME Interface
PMCspan Support
Form Factor
Miscellaneous
60
Description
— Dual 10/100/1000 Ethernet ports routed to front panel RJ-45
connectors, one optionally routed to P2 backplane
— Two asynchronous serial ports provided by an ST16C554D; one
serial port is routed to a front panel RJ-45 connector and the second
serial port is routed to an on-board header (J29, as factory default
build configuration).
— Two 32/64-bit PMC slots with front-panel I/O plus P2 rear I/O as
specified by IEEE P1386
— 33/66 MHz PCI or 66/100 MHz PCI-X
— Tsi148 VME 2eSST ASIC provides:
Eight programmable VMEbus map decoders
A16, A24, A32, and A64 address
8-bit, 16-bit, and 32-bit single cycle data transfers
8-bit, 16-bit, 32-bit, and 64-bit block transfers
Supports SCT, BLT, MBLT, 2eVME, and 2eSST protocols
8 entry command and 4KB data write post buffer
4KB read ahead buffer
— One PMCspan slot
— Supports 33/66 MHz, 32/64-bit PCI bus
— Access through PCI6520 bridge to PMCspan
— Standard 6U VME
— Combined reset and abort switch
— Status LEDs
— 8-bit software-readable switch (S1)
— VME geographical address switch (S3)
— Boundary Scan header (J8)
— CPU RISCWatch COP header (J42)
MVME6100 Single Board Computer Installation and Use (6806800D58E)