How To Make A Phone Call - Kenwood DNX7250DAB Quick Start Manual

3
Operate on the source control screen.
⿠Station search for DAB
1) Touch [
Sub function menu appears.
2) Touch [DB] to select the band.
3) Touch [E], [F], [<<<<], or [>>>>] to
tune in the desired ensemble, service, or
component.
⿠Station search for Radio
1) Touch [
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.
3) Touch [A] or [B] to tune in the desired
station.
⿠Auto memory (Radio only)
1) Touch [
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.
3) Touch [ ].
4) Touch [AME].
5) Touch [A] or [B] in the sub function
menu.
Auto memory starts.
⿠Recalling the preset station
1) Touch [P#].
You can also display the preset list by
touching the frequency display in the center.
✎
NOTE
• For other operations, see Radio Basic Operation
(P.60), Digital Radio Basic Operation (P.62) in
the Instruction Manual.
].
].
].

How to Make a Phone Call

You can use your Bluetooth cell-phone when paired
to this unit.
✎
NOTE
• You cannot register the Bluetooth unit when you are
using the following sources:
iPod, Bluetooth Audio, APPS, aha
1
Register your cell-phone to the unit.
Follow as the procedures shown below. For
detailed operation, see Registering the Bluetooth
Unit (P.73) in the Instruction Manual.
1) Touch [Menu] on any screen.
Top Menu screen appears.
2) Touch [SETUP].
SETUP Menu screen appears.
3) Touch [Bluetooth].
Bluetooth SETUP screen appears.
4) Touch [Search].
Searched Device List screen appears.
5) Select your cell-phone from the displayed list
in the Searched Device List screen.
6) Enter PIN code form the cell-phone.
Registering is completed.
The PIN code is set to "0000" as default.
2
Connect your cell-phone to the unit.
1) Touch the device name you want to connect
in the Bluetooth SETUP screen.
2) Touch [ON] of [TEL(HFP)] in the BT
Connection Settings screen.
21
English ñ