Settings; Entering The Date And Time; Selecting The Language; Selecting The Country - Philips PPF 725 User Manual

10 Settings

EN
Settings
Cursor Navigation 1
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press j to close
the menu and return to the starting mode.

Entering the Date and Time

· Entering the Date and Time
1. Press OK, 91 and OK.
2. Enter the time, e.g. 1400 for 2 pm.
3. Enter the
080627 for 08.06.27.
4. Confirm with OK.
Time and Date After a Short Power Failure
Time and Date After a Short Power
Failure
You must check the time and date after a short
power failure. Confirm with OK.

Selecting the Language

· Selecting the Language
1. Press OK, 92 and OK.
2. Use [ to select the desired display language.
3. Confirm with OK.

Selecting the Country

· Selecting the Country
Setting the Country Correctly
Setting the Country Correctly!
You must set the country in which you are op-
erating the device. Otherwise your device is
not adapted to the telephone network. If your
country is not included in the list, you must
select a different setting and use the correct
telephone cable for the country. Consult your
retailer.
Reset When Setting the Country
Settings will be Deleted!
When you select a new country, all settings
are reset to the factory defaults for that coun-
try. Saved data remains intact. Check the
number entered for the header.
1. Press OK, 93 and OK.
2. Use [ to select the country in which you are op-
erating the device.
3. Confirm with OK.
4. Select with [SURE: YES.
5. Confirm with OK.
28
date (two digits each)
CAUTION!
CAUTION!

Entering Number

· Entering Number
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).
1. Press OK, 94 and OK.
2. Enter your number. Using # or * you can enter
a plus sign.
3. Confirm with OK.
e.g.

Entering Name

· Entering Name
1. Press OK, 95 and OK.
2. Enter the name using the letter keypad. Enter capital
letters by pressing and holding + key. You can delete
individual characters using \. You can enter space
using ½. Press CTRL and the respective letter key
to enter the special character printed above it.
Navigating in the Editor
You can move the cursor using [. Use C
to delete individual characters.
3. Confirm with OK.

Adjust contrast

· Adjust contrast
Adjust contrast
For copying and printing of fax messages, you can select
different contrast levels.
1. Press OK, 44 and OK.
2. Using [, select the desired contrast:
CONTR.:LIGHT- For brighter copies and fax
transmission
CONTR.:NEUTRAL—For all types of originals (for
example white text on black background or docu-
ments with coloured background)
CONTR.:OPTIMISED (Factory settings)—Opti-
mized adaptation for text and photo printing
CONTR.:DARK- For darker copies and fax trans-
mission (for example documents with faint printing)
3. Confirm with OK.
Modifying the Basic Settings
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special function for a
one-time process, take care to restore the de-
fault settings or factory settings after that.
Philips · PPF 725 · PPF 755