Service Commands; Copyright © 2004 Nokia. All Rights Reserved; Call Register (Menu 2) - Nokia 5100 User Manual

• Session mode. Select
Permanent
• Data bearer. Select GPRS.
• GPRS access
access point name and press
OK. An access point name is
needed to establish a
connection to a GPRS
network. You obtain the
access point name from your
network operator or service
provider.
• IP address. Key in the address,
press for a dot, and press
OK. You obtain the IP address
from your network operator or
service provider.
• Authentication
Secure or Normal.
• User name. Key in the user
name and press OK.
• Password. Key in the
password and press OK.
• Allow adverts. You can receive or
reject adverts.
To receive the multimedia
connection settings as a text
message
You may receive the service settings
as a text message from the network
operator or service provider that
offers the WAP service that you
want to use. For more information,
contact your network operator or
service provider.
or Temporary.
point. Key in the
type. Select
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
Font size setting
To select the font size for reading
and writing messages, press Menu,
and select Messages,
settings, Other settings
size.

Service commands

Press Menu, and select
and Service commands. Key in and
send service requests (also known as
USSD commands), such as activation
commands for network services, to
your service provider.
■ Call register
(Menu 2)
The phone registers
the phone numbers of dialled calls,
and the approximate length and cost
of your calls.
The phone registers missed and
received calls only if the network
supports these functions, the phone
is switched on and within the
network's service area.
When you press Options
Missed calls, Received calls
Dialled numbers menu, you can, for
example, view the date and the time
of the call, edit or delete the phone
number from the list, save the
number in the phone book, or send a
message to the number.
Message
and Font
Messages
in the
and
29