Tone Settings; Display Brightness - Nokia 5100 User Manual

Select Screen saver timeout
select the timeout after which the
digital clock display will be
activated. The length of the timeout
can vary from 5 seconds to 60
minutes.
Note that the screen saver overrides
all the graphics and texts on the
display in standby mode.

Display brightness

You can change the display
brightness. Select Display
brightness, scroll with and to
decrease and increase brightness
and press OK to accept it.

Tone settings

Press Menu, and select
then Tone settings. You can find the
same settings in the
see "Profiles (Menu 3)"
Note that the settings you make,
change the settings in the active
profile.
• Select Incoming call alert
select how the phone notifies you
of an incoming voice call. The
options are Ringing, Ascending,
Ring once, Beep once
• Select Ringing tone
voice calls. To select ringing
tones that have been saved in the
Gallery, select Open gallery
the ringing tone list.
and
Settings and
Profiles menu,
on page 31.
to
and Off.
for incoming
from
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
• Select Ringing volume
Vibrating alert
voice calls and messages. The
vibrating alert does not work
when the phone is connected to a
charger, a desktop stand, or a car
kit.
Tip: If you receive a ringing
tone via infrared connection
or by downloading, you can
save the ringing tone in the
Gallery.
• Select Light alert
phone to flash the integrated
flashlight during an arriving call.
Note: If you have switched the
flashlight on before the incoming
call, the flashlight will not flash.
• Select Message alert tone
the alert tone for the incoming
messages, Keypad
Warning tones
to sound tones for example,
when the battery is running out
of power.
• Select Alert for
to ring only upon calls from
phone numbers that belong to a
selected caller group. Scroll to
the caller group you want or
calls and press Mark.
and
for incoming
to set the
to set
tones, or
to set the phone
to set the phone
All
37