Gprs - Nokia 5100 User Manual

• To activate the IR port of your
phone to receive data via IR,
press Menu, and select
Connectivity and Infrared.
• The user of the sending phone
selects the desired IR function to
start data transfer.
If data transfer is not started within
two minutes after the activation of
the IR port, the connection is
cancelled and has to be started
again.
IR connection indicator
• When is shown
continuously, the IR connection
is activated and your phone is
ready to send or receive data via
its IR port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.

GPRS

GPRS connection
You can set the phone to
automatically register to a GPRS
network when you switch the phone
on. Press Menu, and select
Connectivity, GPRS,
connection and Always
When you start an application using
GPRS, the connection between
phone and network is established,
and data transfer is possible. When
you end the application, GPRS
GPRS
online.
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
connection is ended but the
registration to the GPRS network
remains.
If you select When
registration and connection are
established when an application
using GPRS needs it and closed when
you end the application.
When the GPRS connection is
established, the indicator
shown on the top left of the display.
If you receive a call or a text
message, or make a call during a
GPRS connection, the indicator
will be shown on the top right of the
display to indicate that the GPRS
connection is suspended (on hold).
Note that your phone supports three
simultaneous GPRS connections. For
example, you can at the same time
browse WAP pages, receive
multimedia messages and have an
ongoing PC dial-up connection.
GPRS modem settings
You can connect the phone via
infrared or data cable connection to
a compatible PC and use the phone
as a modem to enable GPRS
connectivity from the PC.
Press Menu, and select
Connectivity, GPRS
modem settings. Select
access point and activate the access
point you want to use. Select
active access point
access point settings.
needed, the GPRS
is
and GPRS
Active
Edit
to change the
53