Stopwatch - Nokia 5100 User Manual

M e n u f u n c t i o n s

Stopwatch

You can measure time, take
intermediate times or lap times
using the stopwatch. During timing,
the other functions of the phone can
be used. To set the stopwatch
timing, press .
Split timing
1. Select Menu - Extras
Stopwatch - Split
2. Press Start and the clock starts
running.
Note: If timing exceeds the value
of 99:59:59:9, the time on the
display changes to 00:00:00:0
and the clock keeps running.
3. Press Stop to finish the timing or
Split to take an intermediate
time.
Intermediate times can be viewed
underneath the running time. When
timing is stopped, the result is
shown on the display.
If you restart the timing by pressing
Options - Start, time keeps running
cumulatively instead of restarting at
zero. You can also save or reset
timing using this options list.
50
-
timing.
Copyright © 2004 Nokia. All rights reserved.
Lap timing
1. Select Menu - Extras
Stopwatch - Lap
2. Press Start and the clock starts
running.
3. Press Lap when you want to see
the lap time.
By pressing Lap, timing stops and
then restarts immediately at zero.
The newest lap time is displayed
under the running time.
When you press Stop
and the total time is shown.
Viewing times
You can see saved times by selecting
View times. The named time sets are
listed on the display. One time set
can have up to 20 intermediate and
lap times. To view them select a time
set. In this view to erase times, select
Options - Delete times.
Deleting times
You can delete times by selecting
Delete times from the Stopwatch
main menu. The options are either
erasing times one by one or all times
at once. The deletion is confirmed by
pressing OK.
-
timing.
timing stops