Use; The Control Panel - Zanussi TC 7122 User Manual

Use

The control panel

1 Programme Guide
This will help you to select the correct time for
drying.
2 Mains-ON Light
Comes on when the appliance is working and goes
out at the end of the programme.
3 Low Temperature Button
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
In this case you should select a longer drying time.
4 Start Button
Press this button to start the dryer after having
selected the programme.
If the door of the appliance is opened while the
programme is running, this button must be
pressed again after closing the door in order to
restart the programme from the point at which it
was interrupted.
5 Water Full Indicator Light
This light illuminates when the reservoir is full or
improperly fitted.
6 Time Selector Dial
The selector dial incorporates two drying cycles,
one of up to 150 minutes at a high temperature for
cotton and linen, and one of up to 100 minutes at a
low temperature for synthetic fabrics. To set the
machine to the selected time, turn the dial clockwise
until the time you want coincides exactly with the
pointer.
NEVER attempt to turn the dial in an
anticlockwise direction.
When selecting the drying time you should
remember that it includes a 10 minute cooling phase
(position on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages
to the laundry.
7