Control Panel.page; Use Of Controls.page - Zanussi TD 526 Instruction Booklet

Tumble dryer autoreverse
Hide thumbs Also See for TD 526:
Table of Contents

Advertisement

USE
Control panel
USE OF CONTROLS
1. Programme Chart
This will help you to select the correct time for drying.
2.
On/Off Button
do
Press this button after selecting the drying time to start
the machine up.
Press it again to switch the machine off.
3. Low Heat Button □
This button must be depressed when drying synthetic
fabrics to reduce the heating power.
If you use this button to reduce the temperature when
drying cotton or linen items, a longer drying time
should be selected.
4. Drying Time Selector Dial
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly
with the pointer.
NEVER attempt to turn the dial in an anticlockwise
direction.
The selector incorporates a drying cycle of up to 120
minutes.
When selecting the drying time, you should remember
that it includes a 8 minute cooling phase (position
on the dial).
This phase should not be shortened, stopped or avoid¬
ed, as this could cause skin burns or damages to the
laundry.
Additional drying
If, at the end of the programme, the laundry is still too
damp, set the dial for a further period of drying
(remembering to take into account the cooling period).
5. Mains On Light %
This lights up when the On/Off button is depressed
and will go out when it is pressed again.
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD 526 and is the answer not in the manual?

Questions and answers

Table of Contents