Duracell POWERPACK 600 Owner's Manual page 50

Table 5-1 Troubleshooting reference
Troubleshooting Reference
Problem Possible Cause Solution
Green The voltage at the AC Use AC wall outlet that supplies
Charging wall outlet is less than 120 V AC.
Status light is 120 V AC.
still flashing
and hasn't
>
changed to
steady after 50
hours of
charging.
The engine Duracell® Powerpack
Recharge the Duracell® Powerpack
being jump- battery is not fully battery.
started will not charged.
start.
The engine condition Have the engine serviced.
IS
poor.
External fuse (250 A) Replace 250 A, 32 V fuse with same
is blown. type and ratings.
The engine start Upgrade to a higher power
capacity exceeds the Duracell® Powerpack.
Duracell® Powerpack
jump-start capability.
- - - - - - - - -
1 - - - - - - - - - - - - - - _ _ _ _ _ _ _ _ M_• • • _ _ _ _ _ _ _ _ _ _ _ _ _. _ ._ _ _ • • _ _ _ _ _ _ • _ _ _ • _ _ • • _ _
The battery External fuse (250 A) Replace 250 A, 32 V fuse with same
clamps of the is blown. type and ratings.
jump-start
cables measure
zero volts.
The light does Light bulb has burnt Remove lens cover and replace bulb
not tum on.
out. with one of the same type and rating.
The AM radio The Duracell®
Tum off the AC outlets.
does not work Powerpack AC outlets
or buzzes are being used,
continuously causing interference.
975-0339-01-01
39