Using Duracell® Powerpack 600 For The First Time; Recharging With The Ac Charger - Duracell POWERPACK 600 Owner's Manual

Using Duracell® Powerpack 600 for the First Time
Using Duracell® Powerpack 600 for the
First Time
Important: Prior to operating your AC appliance or 12 V DC
appliance, ensure that the battery of the Duracell® Powerpack is
fully charged. If the battery has been fully discharged, recharging
with the AC Charger may take up to 35 hours.
Recharging with the AC Charger
Note: The Battery Charge
(%) reading on the digital display is
only accurate when the Duracell® Powerpack has been
disconnected from all appliances and all charging sources for 15
minutes.
Recharging with the AC charger is a true "plug-in-and-
forget" charging method. We recommend leaving the AC
charger connected when the Duracell® Powerpack is not in
use.
To recharge with the AC Charger:
1. Disconnect any 12 V DC appliances and tum the light
off.
2. Tum the AC Outlet
ON/OFF
switch to
OFF.
3. Plug the AC Charger into a standard AC wall outlet.
4. Insert the AC Charger cable end into the charger input
socket page 9.
The green Charging Status light changes from flashing to
steady when charging is complete (about 35 hours if the
battery is completely discharged).
975-0339-01-01
13