Nokia MW1122 Administrator's Manual page 91

MW1122 Administrator Manual
Command
Description
Syntax
Arguments
Example
MW1122> clear log
MW1122>
Command
Description
Syntax
Arguments
Example
MW1122> reset wlan
MW1122>
5-56
Clear counters
Clears the statistics counters.
clear {log | eth | wlan | atm | bridge | ppp | ip}
log argument rewinds the diagnostic log to the begin-
ning of the log file.
eth argument clears the Ethernet statistics counters.
wlan argument clears the WLAN statistics counters.
atm argument clears the ATM statistics counters.
bridge argument clears the bridging counters.
ppp argument clears the PPP counters.
ip argument clears the IP statistics counters.
Reset subsystem
Resets subsystems.
reset {log | dsl | wlan | ppp [vcc-id] | arp | bridge | napt}
log resets the diagnostic log subsystem.
dsl resets the DSL subsystem. The DSL connection
will be re-established.
wlan resets the WLAN subsystem. The subsystem
reset is required for loading the WLAN configuration
parameters to the WLAN subsystem.
ppp resets the whole PPP subsystem. The PPP con-
nection will be re-establihed. If you provide a VCC
number (vcc-id), only that connection will be reseted.
arp clears the ARP table.
bridge clears the bridge table.
napt resets the NAPT subsystem.
E Copyright Nokia Networks Oy
C33902001SE_00