Table of Contents
Advertisement
Command
Description
Syntax
Arguments
Example
MW1122> atm ping 0 23 segment
reply asserted roundtrip time = 4.20 ms
MW1122>
The debug commands are used to solve difficult problem situations.
The debugging can be switched off with the following command.
Other debugging commands are not handled in this manual.
Command
Description
Syntax
Arguments
Example
MW1122> no debug all
MW1122>
C33902001SE_00
ATMping
Sends five OAM F5 loopback cells to the specified VPI/
VCI destination with a 5 second total timeout interval.
You can use ATMping to test the ATM connection.
atmping <vpi> <vci> <range>
vpi is the Virtual Path Identifier and vci is the Virtual
Channel Identifier of the ATM channel you want to test.
vpi values are integers (0...255).
vci values are integers (0...65535)
range values are segment and end-to-end depend-
ing whether you want to test the first segment of the
ATM connection or the end-to-end connection.
Switch off debug
Switches all debug operations off. To quit debugging,
write no debug all on the screen regardless of what is
being printed on the screen.
no debug all
no switches debugging off.
E Copyright Nokia Networks Oy
Managing MW1122
5-51
Advertisement
Table of Contents
