Table of Contents
Advertisement
MW1122 Administrator Manual
Command
Description
Syntax
Arguments
Example
MW1122(conf-wlan)#wep mode allowed
MW1122(conf-wlan)#
Command
Description
Syntax
Arguments
Example
MW1122(conf-wlan)#wep default-key 1
MW1122(conf-wlan)#
5-68
Select wireless encryption mode
Selects wireless encryption mode
[no] wep mode <encrypt-scheme>
no switches wireless encryption scheme off.
encrypt–scheme argument can be
allowed In this mode, the station may use either
open-key or shared-key authentication. If the station
uses the open-key authentication, encryption is dis-
abled. If the station uses shared-key authentication, en-
cryption is enabled.
required In this mode, it is mandatory to use shared-
key authentication. If open-key authentication is used, a
failed authentication will result. When the station uses
shared-key authentication, encryption is always used.
Default keys are used if no station-specific key exists.
Broadcast/multicast data is encrypted using the default
key.
specific-key-required In this mode, the station
must use shared-key authentication and station-specific
keys. If the station uses open-key authentication or sta-
tion-specific key is not available, a failed authentication
will result. Successful shared-key authentication results
encryption using the stattion-specific keys. Broadcast
and multicast data is encrypted using the default key.
wifi-required In this mode, the station may use
either open-key or shared-key authentication and in
both cases encryption is always used. Default keys are
used if no station-specific exist. Broadcast and multi-
cast data is encrypted using the default key.
Select default encryption key
Selects which default key is used.
[no] wep default-key <id>
no switches default key off.
id argument can be 1, 2, 3 or 4.
E Copyright Nokia Networks Oy
C33902001SE_00
Advertisement
Table of Contents
