Table of Contents
Advertisement
The command line interface has been divided into two modes: main
and configuration. The main mode lets you monitor the status and
performance of MW1122. The configuration mode lets you change
MW1122 configuration. The CLI is case sensitive. All commands
must be given in lower case characters. Only file names and strings can
contain upper case characters.
In the configuration mode, functions can be activated by typing the
corresponding command, for example
deactivated by simply typing
require typing in parameter values, the default value can be restored by
typing
de long-retry
means "default". If you type in a value which is incorrect (for example,
letters instead of numbers), the CLI prompts you to enter the value
correctly and displays help. You can always get help on the command
or display by typing
You can recall you previous commands by pressing the "up-arrow"
key on your keyboard.
The configuration mode has been divided into levels. You can navigate
through the configuration mode by typing the name of the level. By
typing
exit
you to the root level of the configuration mode (
The configuration mode levels are:
D
system
D
password
D
eth
D
wlan
D
vcc1, vcc2, vcc3, vcc4, vcc5, vcc6, vcc7, and vcc8
D
vbridge
D
mngtvcc
D
common.
The example below shows how to access the different levels:
MW1122>
MW1122>conf
MW1122(conf)#system
MW1122(conf-system)#password
MW1122(conf-password)#eth
MW1122(conf-eth)#wlan
MW1122(conf-wlan)#vcc1
MW1122(conf-vcc1)#vcc2
C33902001SE_00
, for example.
or
help
?
you will return to the main mode.
E Copyright Nokia Networks Oy
Managing MW1122
. The function can be
bridging
. In commands which
no bridging
in front of the command
de
at the command prompt.
top
MW1122(conf)#
command returns
).
5-33
Advertisement
Table of Contents
