Lan And Wlan Interfaces - Nokia MW1122 Administrator's Manual

MW1122 Administrator Manual
LAN interface
Routing (IP ad-
dress confi-
gured) and
bridging acti-
vated.
Bridging acti-
vated
Table 2-1

LAN and WLAN interfaces

LAN and WLAN interfaces can be configured individually to bridge
and route packets. There are three different operational modes in both
LAN and WLAN interfaces:
2-6
WLAN inter-
face
Route/tunnel IP, bridge all other traffic
Routing (IP ad-
dress confi-
gured) and
bridging acti-
vated or slaved
to LAN interface
(single subnet).
Route/tunnel IP, bridge all other including IP
Bridging acti-
vated or slaved
to LAN interface
(single subnet).
Operational modes
E Copyright Nokia Networks Oy
ATM VCC inter- Vbridge
faces (gateway/host
interface)
VCCs that only Typically not
route or tunnel used in this
have routing (IP case. The unit
address confi- can be man-
gured) or PPTP aged locally
local tunneling through LAN
activated. and WLAN in-
terfaces and re-
VCCs that both
motely through
bridge and
a separate
route have addi-
management
tionally bridging
VCC or the ATM
activated. This
VCCs which
requires ETH-
have routing
LLC encapsula-
activated.
tion to be used
on those VCCs.
VCCs that only
bridge have
only bridging
activated.
VCCs that only Used as a com-
route or tunnel mon IP gateway
have routing (IP interface for
address confi- both LAN and
gured) or PPTP WLAN inter-
local tunneling faces.
activated.
VCCs that only
bridge have
only bridging
activated.
C33902001SE_00