Table of Contents
Advertisement
Command
Description
Syntax
Arguments
Example
MW1122(conf-common)#dhcp address 1 168.190.1.1
255.255.255.0 100
MW1122(conf-common)#
Command
Description
Syntax
Arguments
Example
MW1122(conf-common)#dhcp dns 1 primary 190.168.2.1
MW1122(conf-common)#
C33902001SE_00
Set DHCP address range
You can define to DHCP address ranges with this com-
mand. The default pool is the IP address of the inter-
face with a subnet mask 255.255.255.0. If you use
DHCP, you must set both ranges, one for the Ethernet
interface and the other for the wireless LAN interface.
(1 and 2). The only exeption is when you use wireless
LAN interface as a slave to Ethernet interface.
If you don't define an address range, up to two ranges
will be defined automatically for ETH/WLAN/VBRIDGE
interfaces, in this order, if the interface has an IP ad-
dress.
[no] dhcp address <scope> <pool-base> <pool-mask>
<pool-size>
no switches of address pool.
scope defines the pool. Values are 1 and 2.
pool-base is the first IP address in the pool in dotted
decimal format.
pool-mask is the subnet mask of the pool addresses.
pool-size is the size of the address pool, 0...254.
Set DNS address for DHCP clients
Defines a DNS address for the DHCP clients.
[de | no] dhcp dns <scope> <class> <dns-server>
scope defines the DHCP pool (1 or 2).
class defines whether the server is a primary or a
secondary server.
dns-server is the IP address of the DNS server.
E Copyright Nokia Networks Oy
Managing MW1122
5-83
Advertisement
Table of Contents
