Table of Contents
Advertisement
Command
Description
Syntax
Arguments
Example
M1122> reset ppp
M1122>
Command
Description
Syntax
Arguments
Example
M1122>logout
Command
Description
Syntax
Arguments
Example
M1122>reload
in progress...
C33906001SE_00
Reset subsystem
Resets subsystems.
reset {log | dsl | ppp [vcc-id] | arp | bridge | napt}
log resets the diagnostic log subsystem.
dsl resets the DSL subsystem. The DSL connection
will be re-established.
ppp resets the whole PPP subsystem. The PPP con-
nection will be re-establihed. If you provide a VCC
number (vcc-id), only that connection will be reseted.
arp clears the ARP table.
bridge clears the bridge table.
napt resets the NAPT subsystem.
Logout
Logs out from the command line interface.
logout
None
Fast restart M1122
Restarts M1122 software.
reload
None
E Copyright Nokia Networks Oy
5-43
Advertisement
Table of Contents
