Table of Contents
Advertisement
5.3.3 Service Providers pages
The Service Providers page can be used to set authentication for ATM
VCCs with PPP encapsulation (Figure 5-3). You can set the
Authentication method and the corresponding Username and
Password. You can also view Network connection information in the
bottom of the page. If you are using PPTP encapsulation, you can
change the name of the connection through the Service Providers page
(Figure 5-4). The name can be used in your PPTP client for tunnel
configuration, see section 2.2.7 Point-to-Point Tunneling Protocol.
Figure 5-3
Service Provider page with PPP configuration
E Copyright Nokia Networks Oy
5-11
C33906001SE_00
Advertisement
Table of Contents
