Identifying The Top Of Supply; Rotating A Field - Monarch 9400 Series User Manual

Identifying the Top of Supply

The top of the supply is the cut edge (the side that exits the
printer last). The bottom of the supply is the leading edge (the
side that exits the print first). The figure below shows the top
edge and the bottom edge of the supply.
Top
Bottom

Rotating a Field

There are four directions you can print a field on the supply:
TOP
LEFT
BOTTOM
RIGHT
The top of the field points to the top edge of
the supply.
The top of the field points to the left edge of
the supply.
The top of the field points to the bottom
edge of the supply.
The top of the field points to the right edge
of the supply.
2. Designing a Format
2-3