Defining A Check Digit - Monarch 9400 Series User Manual

9400 Series User's Manual
9420/9440 Mode Changes the character spacing and field
Auto-online
While in a function, you can cancel your entries by
!
pressing . To exit to the main menu, press

Defining a Check Digit

This option lets you define up to 12 calculation methods for
check digits. If you use a check digit with incrementing or
decrementing fields, the check digit is recalculated each time
the field increases or decreases.
Two check digit calculation methods are already defined for
you. You can use one of these methods, or define and use
your own methods. You can also redefine the two calculation
methods that are already entered.
1. From the main menu, press
Configuration. Press
Type the 1-8 character security password and
E
press
NOTE: When you first receive the printer, the password is
MANAGER or ONLINE.
5-2
locations to match the 9420 and 9440
printers. See "Using 9420/9440 Compatible
Mode."
Sets the printer to automatically start online
each time the printer is turned on. See
"Using Auto-online Mode" (you'll only see
this option if you use the Online password
to get into Printer Configuration).
E
Enter password:_____________
.
!
D
to display Printer
. You'll see
again.