Advanced Menu - TYAN Tempest i5400XL User Manual

3.4 Advanced Menu

This section facilitates configuring advanced BIOS options for your system.
Main Advanced
Hardware Monitoring
BIOS Event Logging
Advanced Chipset Control
Advanced Processor Options
Diskette Controller
ATA Controller
Integrated Network Interface
Integrated Audio:
Integrated USB
I/O Device Configuration
PCI Configuration
Reset Configuration Data
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
Integrated Audio
This feature is used to configure the audio controller.
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure the
ESCD (Extended System Configuration Data). Therefore, there is usually no need
to manually force the BIOS to reconfigure the ESCD.
However, sometimes, the BIOS may not be able to detect the hardware changes. A
serious resource conflict may occur and the operating system may not even boot as
a result. This is where the Reset Configuration Data BIOS feature comes in.
This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this
BIOS feature and then reboot your computer. The new ESCD should resolve the
conflict and allow the operating system to load normally.
Please note that the BIOS will automatically reset it to the default setting of No after
reconfiguring the new ESCD. So, there is no need for you to manually disable this
feature after rebooting.
No / Yes
PhoenixBIOS Setup Utility
Security Power
[Auto]
[No]
-/+ Change Values
Enter Select
Sub-Menu
45
http://www.tyan.com
Boot Exit
Item Specific Help
Hardware monitoring
configuration
F9 Setup Defaults
F10 Previous Values