Power Connection; Cleaning The Appliance's Interior - Zanussi ZFC202-1 Instruction Booklet

Power connection

Before plugging in the appliance to the mains socket,
check that the voltage and frequency indicated on the
appliance's rating plate are the same as those
provided by your home power supply.
A 6% fluctuation above or below rated voltage is
acceptable.
For operation at different voltages, a suitable
transformer should be used.
The appliance MUST be connected to an efficient
earth or ground tap.
The supply-lead plug in fact incorporates a special
earth or ground contact for this purpose. If by any
chance the sockets of your domestic wiring system
are not earthed, the appliance must be connected to a
separate earth or ground wire by a qualified
electrician, in accordance with existing safety
regulations.
The manufacturer declines to accept any liability
if this accident-prevention procedure is not
followed.
This appliance complies with EEC directive
number 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the
following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.

Cleaning the appliance's interior

Before using the appliance for the first time, wash all
internal parts with lukewarm water and neutral soap
so as to remove the typical «new» smell and then dry
thoroughly.
Do not use detergents or abrasive powders as these
will damage the finish.
5