Use; Start-Up - Temperature Regulation - Zanussi ZFC202-1 Instruction Booklet

Start-up - temperature regulation

After plugging the appliance, turn the thermostat knob
located at the top right of the fridge, clockwise to the
required position (apart from position «
Medium setting is recommended.
Temperature is kept constant automatically and can
be increased by turning the knob to lower numbers, or
reduced by turning it to higher numbers.
Proper setting is achieved by keeping in mind that the
temperature inside the fridge depends on the
following factors:
room temperature;
number of times the door is opened;
quantity of food stored;
location of the appliance.
To turn the appliance off, set the thermostat knob to «
In this refrigerator the refrigerating compartment
temperature may be regulated not only by using the
thermostat but also by operating on the baffleplate
placed under the evaporator (Fig. 6).
To obtain a lower temperature move the baffleplate
forward, to obtain a higher temperature move it
backward. It is advisable to move the baffleplate
backward when the room temperature is lower than
+20 C (Fig. 7).

USE

O » - off).
O ».
GB
Fig. 6
Fig. 7
7