Table of Contents
Advertisement
If this appliance featuring magnetic door seals is
to replace an older appliance having a spring lock
on the door or lid, be sure to make that spring
lock unusable before you discard the old
appliance. This will prevent it from becoming a
death-trap for a child.
Positioning
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature between +18 C and +43 C (class T);
+18 C and +38 C (class ST); +16 C and +32 C (class
N); +10 C and +32 C (class SN).
The class of your appliance is shown on its rating
plate.
For a more efficient operation of the appliance the
minimum distance between the top of the appliance
and other overhanging kitchen furniture, if any, should
be at least 100 mm (Fig. 1-A).
The best solution is shown in Fig. 1-B (without
overhanging kitchen furniture).
The appliance sides may also be in contact with the
kitchen furniture, provided that air can circulate free in
the rear and top part.
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
For the models designed to be built in the furniture it
is necessary to follow the specific instructions
regarding building in.
Rear spacers
In the plastic envelope containing the Operating
Instructions are also included two wall spacers to be
fitted into the special openings provided on the back
of the appliance.
Push-fit the spacers into the openings, making sure
that arrow (A) is positioned as per Fig. 2 and then turn
the spacers through 45 until they lock in (arrow in
vertical position).
4
INSTALLATION
A
NP006
45°
D039
Fig. 1
B
Fig. 2
A
GB
Hide quick links:
Advertisement
Table of Contents
