Hitachi CP-X8150 User Manual page 7

2.2 Installing the first projector (Set A) - Setting up Set A
4.
Display the menu with the MENU button.
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display
the STACK MODE dialog.
Highlight SUB pressing the ▲/▼ buttons,
and press the ► button.
7.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting. ( 19 )
8.
If you are using Intellectual Stack, disable the remote control receiving using
KEY LOCK. (Operating Guide
• Set A will not be operated by the remote control hereafter. To
NOTE
avoid crosstalk when operating with the remote control, it is recommended to
disable the remote control receiving using KEY LOCK.
• After the STACK MODE setting is completed, Set A (Sub) will not be able
to receive the remote control signals. When STACK MODE is set to OFF,
enable the remote control receiving using KEY LOCK if necessary.
→ OPTION menu)
→ OPTION
7
(continued)
(Operating Guide
menu)
Installation
→ Using the