JVC VN-H37U Instructions Manual page 38

Internet Explorer Setting
Settings (continued)
Alarm Page (continued)
E
TCP
E
UDP
E
Switch Scene
File
E
Position
E
Play Audio
(VN-H57U/
H257U/H257VPU/
H157WPU only)
E
Pin Output1 Make,
Pin Output1 Break,
Pin Output2 Make,
Pin Output2 Break
(VN-H57U/H257U/
H257VPU/
H157WPU only)
38
TCP IP Address : Enter the IP address or FQDN of the destination of TCP
TCP Port Number : Enter the port number of the destination of TCP
TCP Data : Enter a character string to be sent for TCP notification.
JPEG Attachment : Specify whether or not to attach an image file. To attach
Encoder : Specifies an Encoder No. for encoding of attached
Memo:
● You cannot select [Attach JPEG] if there is no channel with Encode set to
JPEG.
UDP IP Address : Enter the IP address or FQDN of the destination of UDP
UDP Port Number : Enter the port number of the destination of UDP
UDP Data : Enter a character string to be sent for UDP notification.
Scene File : Select the scene file to change.
For details of the scene file, see the [Camera] page. (A Page 19)
[Set values: General, Indoor, Outdoor, CLVI, Traffic, DataSaving, Day
(Color), Night (B&W)]
Action Position Number:Sets a position number to move.
[Set values: 0 to 19]
Audio File : For selecting the file number to play when the [Action] item is
set to "Play Audio".
[Set values: 1 to 5]
Alarm Output Duration: For specifying the output time when the [Action] item
[Set values: 0 / 100 to 5000] msec
notification.
notification. (1 to 65535)
You can enter text consisting of up to 127 alphanumeric
characters. Or a text of up to 63 dual-byte characters
can be entered.
JPEG images, check the Attach box and select the
transmission channel.
JPEG files.
notification.
notification. (1 to 65535)
You can enter text consisting of up to 127 alphanumeric
characters. Or a text of up to 64 dual-byte characters
can be entered.
is set to "Pin Output1 Make", "Pin Output1 Break",
"Pin Output2 Make", or "Pin Output2 Break".
* The [Set values] in bold letters are factory defaults.