JVC VN-H37U Instructions Manual page 103

C Day/Night
(VN-H37U/H57U/
H257U/H237VPU/
H257VPU/H157WPU
only)
Mode
D
Focus Assist Mode Switches to the Focus Assist mode.
Sets video to Black & White mode. Also allows you to select from among 3
levels for automatically activating Black & White mode in low-light
conditions.
Color : Keeps color mode activated at all times.
Black & White : Keeps Black & White mode activated at all times.
Auto Low : Switches to Black & White mode when the subject's signal
level has a low level of brightness.
Auto Mid : Switches to Black & White mode when the subject's signal
level has a medium level brightness.
Auto High : Switches to Black & White mode when the subject's signal
level has a medium level brightness.
[Set values: Color, Black & White, Auto Low, Auto Mid, Auto High]
Memo:
● The mechanical sound of the infrared filter insertion/removal can be
heard when the mode switches.
● If you set "Auto Low", "Auto Mid", or "Auto High", the camera
immediately switches modes when the set amount of illumination is
detected.
Press the [Execute] button, and the [Current State] will be changed to
[Focus Assist] and the Focus Assist mode will be selected. The [Stop]
button is displayed during Focus Assist mode.
Press the [Stop] button, and the [Current State] will return to [Normal] and
the Focus Assist mode will be released.
Memo:
● The camera enters the Focus Assist mode and the [STATUS] indicator
blinks green and orange alternately. When the Focus Assist mode is
released, the [Status] indicator lights up in green.
● The Focus Assist mode is released after three minutes if it is not used.
* The [Set values] in bold letters are factory defaults.
103