JVC VN-H37U Instructions Manual page 37

B
1st Trigger
C
Max. Interval
(VN-H57U/
H257U/H257VPU/
H157WPU only)
D
2nd Trigger
(VN-H57U/
H257U/H257VPU/
H157WPU only)
E
Mail
Select the 1st trigger to perform an action.
[Set values: Pin Input1 Make, Pin Input1 Break, Pin Input2 Make, Pin
Input2 Break, Position, Audio Detection1, Audio Detection2
(VN-H57U/H257U/H257VPU/H157WPU only), Motion
Detection, Tampering Detection, Black & White, Day/Night,
Time]
Memo:
● If you set the [2nd Trigger] to "Disable", an action will be performed when
only [1st Trigger] is triggered. (VN-H57U/H257U/H257VPU/H157WPU
only)
● When "Motion Detection" or "Position" is selected for the [1st Trigger]
trigger, [Max. Interval] and [2nd Trigger] cannot be selected. (VN-H57U/
H257U/H257VPU/H157WPU only)
● "Time" can be specified only when the action is "Switch Scene File".
This is available when both [1st Trigger] and [2nd Trigger] are set.
Specify the maximum interval between each trigger for [1st Trigger] and [2nd
Trigger].
An action will be performed if [2nd Trigger] occurs within the maximum time
interval after [1st Trigger] occurs.
[Set values: 1 - 3600] sec
Select the 2nd trigger to perform an action.
[Set values: Disable, Pin Input1 Make, Pin Input1 Break, Pin Input2 Make,
Pin Input2 Break]
Mail Settings : If you have set the [SMTP Server], [Port Number], and
Mail Address : Enter the recipient's mail address.
Mail Text : Enter the mail text. You can enter text consisting of up
JPEG Attachment : Specify whether or not to attach an image file to the
Encoder : Specifies an Encoder No. for encoding of attached
Memo:
● You cannot select [Attach JPEG] if there is no channel with Encode set to
JPEG.
[Sender Mail Address] on the [Alarm Environment]
page, the AConfiguredB message is shown. If not set,
the ANot configuredB message is shown. For details
about the mail setup, refer to "Alarm Environment
Page". (A Page 40)
to 127 alphanumeric characters. Or a text of up to 63
dual-byte characters can be entered.
mail. To attach JPEG images, check the Attach box and
select the transmission channel.
JPEG files.
* The [Set values] in bold letters are factory defaults.
37