JVC VN-H37U Instructions Manual page 36

Internet Explorer Setting
Settings (continued)
Alarm Page (continued)
A
Action
36
Selects the action performed when the alarm is activated.
Disable : Performs no action.
Mail : Sends an email. Specify the recipient's mail address. The mail
subject will be "Alarm from {model name}" (e.g., for VN-
H257VPU: "Alarm from VN-H257VPU"), and the sender will be
the value for [Camera ID].
Input the message body to be sent in [Mail Text]. Up to 127
alphanumeric characters can be sent. Up to 63 Japanese
characters can be sent.
Set JPEG Attachment to "ON" to attach the latest image to the
mail.
TCP : Sends the text string input in the [TCP Data] field via TCP to the
recipients specified in [TCP IP Address] and [TCP Port
Number].
UDP : Sends the text string input in the [UDP Data] field via UDP to
the recipients specified in [UDP IP Address] and [UDP Port
Number].
Position : Move to the position set at [Action Position Number]
item F (A Page 39).
Play Audio : Plays the audio file registered to the camera.
Refer to [Audio File] on the [Audio] page.
(A Page 34) (VN-H57U/H257U/H257VPU/H157WPU only)
Pin Output1 Make:Changes Pin Output1 to Make.
Pin Output1 Break:Changes Pin Output1 to Break.
Pin Output2 Make:Changes Pin Output2 to Make.
Pin Output2 Break:Changes Pin Output2 to Break.
Pin Output1 Make, Pin Output1 Break, Output2 Make, and
Pin Output2 Break are available on VN-H57U/H257VPU/
H157WPU/H257U only.
Set the time in the [Alarm Output Duration] field.
Switch Scene File:Specifies the scene of filming.
[Set values: Disable, Mail, TCP, UDP, Position, Play Audio, Pin Output1
Make, Pin Output1 Break, Pin Output2 Make, Pin Output2
Break]
* The [Set values] in bold letters are factory defaults.