Table of Contents
Advertisement
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
product to normal operation.
If the product has been dropped or the cabinet has been
u
damaged.
If the product exhibits a distinct change in performance,
u
indicating a need for service.
Power and extension cords
-
Do not allow anything to rest on the power cord.
-
Do not locate this product where persons will walk on the cord.
-
Use the proper power cord with correct attachment plug type. If the
power source is 120 V AC, use a power cord that has UL and C-UL
approvals. If the power source is a 240 V AC supply, use the tandem
(T blade) type attachment plug with ground conductor power cord
that meets the respective European country's safety regulations, such
as VDE for Germany.
-
Do not overload wall outlets or power cords. Ensure that the total of
all units plugged into the wall outlet does not exceed 10 amperes.
-
Ensure that the total ampere ratings on all units plugged into the
extension cord is not above the cord's rating.
-
If the power supply cord, which came with your monitor, is to be
connected to the PC instead of the wall outlet, this equipment is to be
used with UL/TÜV approved computers with receptacle rated
100~240V AC, 50/60Hz, 1.0A (minimum).
Environment
-
Place the monitor on a flat and leveled surface.
-
Place the monitor in a well-ventilated place.
-
Keep the monitor away from:
overly hot, cold or humid places, places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic fields.
2
Advertisement
Table of Contents
