Princeton LCD15 Reference Manual page 10

WARNING
be sure to hold the connector instead of the wire part.
1. Connect one end of the power cord to the monitor and the other end
to the AC outlet. (Œ)
2. Connect one end of the signal cable to the rear side of computer and
the other to the LCD monitor. Tighten by turning clockwise the two
thumb screws to ensure proper grounding. (•)
3. Connect either end of the audio cable to the Audio In connector on
the monitor and the other end to the audio-out connector of your
computer (Ž)
4. Pressing the power button on front panel turns the display system
power on. (•)
When you disconnect the cord/cables,
9