Setting Surface Burner Controls
Setting the Simmer / Regular / Power Burners
Figure 1 - Regular Burner
Operating the Regular Burner:
Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of the
OFF position (See Figure 1).
3. Release the knob and rotate to the LITE position.
Note: All four (or five) electronic surface ignitors will spark at the same
time. However, only the burner you are turning on will ignite.
4. visually check that the burner has a flame.
5. Once the burner is lit, continue to turn counterclockwise to the desired
flame size. The control knobs do not have
to be set at a particular setting. Use the
knob indicator settings to adjust the flame
as needed. DO NOT cook with the surface
control knob in the LITE position (The
electronic ignitor will continue to spark if
the knob is left in the LITE position).
w i s
C o u n
t erc l o c k