The Control Panel - Zanussi ZDS 679 EX Instruction Booklet

The control panel

1 2
1. On/Off indicator light
This comes on when the On/Off pushbutton is
depressed, indicating that the machine is on.
2. On/Off pushbutton
Press this button to preset the dishwasher to
accept settings (selection of a wash programme,
economy drying, etc.).
The number "3" appears in the digital display.
When the washing programme has finished, the
machine stops automatically and the On/Off
indicator light remains on. To switch the indicator
light off or to stop the machine at any time, press
the On/Off pushbutton.
3. Indicator lights
Open door
Flashes when the door has not been
properly closed.
Salt
Flashes when the salt has run out, to remind
you to refill the salt container.
Water tap
Flashes when:
- The water tap is closed.
- The mains water supply has been cut off.
- The inlet hose may be blocked.
Rinse aid
Flashes when the rinse aid has run out, to
remind you to refill the rinse aid dispenser.
3 4 5
31
6 7 8 9 10
4. Programme selector
pushbutton
To select a programme press this button until you
see in the digital display the number of the
programme you wish to select (see chart
"Washing programmes"). All the indicator lights of
the phases corresponding to the selected
programme will come on.
5. Half load pushbutton
By pressing this button, washing can be confined
to a single basket instead of both.
The indicator light corresponding to the basket
selected comes on.
Upper basket
Lower basket
This is very useful and economical when only a
few dishes need washing.
Remember to load all the dishes into the basket
selected.
If both indicator lights are out, washing will be
carried out in both baskets.
PCP14GB