SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Do not keep the appliance door open without supervision to • prevent to fall on it. Before any maintenance operation, deactivate the appliance • and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean •...
• When you contact the Authorised Service • Disconnect the appliance from the mains Centre, ensure that you have the following supply. information that is available on the rating plate. • Cut off the mains cable and discard it. Model : •...
Page 5
Indicator Description Drying phase. It comes on when the drying phase operates. Multitab indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. EnergySaver indicator. PROGRAMMES Consumption values Degree of soil Programme Programme phases...
Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) • Prewash 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficent use of water and energy conumption for crockery and cutlery with normal soil.
USER MODE Press and hold simultaneously Delay and Start until the indicators start to flash. In user mode, the following settings can be changed: • The level of the water softener according to the water hardness. • The activation or the deactivation of the acoustic signal for end of programme. •...
DEACTIVATING THE RINSE AID DISPENSER While the appliance is in user mode: While the appliance is in user mode: 1. Press Delay. 1. Press Option. • The indicators go off. • The indicators go off. • The indicator continues to flash. •...
3. Fill the rinse aid dispenser with special rinse Do not use detergent and do not load the aid for dishwasher. baskets. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance. ADDING SALT Before first use put one litre of water in the salt container.
ADDING DETERGENT If the programme has a prewash phase, put a small quantity of detergent also in compartment B. ADDING MULTI-TABLETS THE AUTO OFF FUNCTION This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: •...
If the door is opened for more than 30 seconds during the drying phase, the running programme will end. Press on/off button or wait for Auto OFF to deactivate the appliance. END OF THE PROGRAMME If you open the door before the activation of Auto OFF, the appliance is automatically When the programme is completed the display deactivated.
• The programme is applicable for the type of load • Make sure that glasses do not touch other and for the degree of soil. glasses. • The correct quantity of detergent is used. • Put cutlery and small items in the cutlery basket. •...
CLEANING THE SPRAY ARMS • If you regularly use short duration programmes, these can leave deposits of grease and Do not remove the spray arms. If the holes in the limescale inside the appliance. To prevent this, spray arms are clogged, remove remaining parts of we recommend to run long duration soil with a thin pointed object.
Page 14
Problem and alarm code Possible cause and solution The appliance does not drain • Make sure that the sink spigot is not clogged. the water. • Make sure that the filter in the outlet hose is not clogged. • Make sure that the interior filter system is not clogged. The display shows •...
THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • If you use multi-tablets, always switch on the option Multitab. •...
Problem Possible cause and solution Limescale deposits on the table- • The level of salt is low, check the refill indicator. ware, on the tub and on the in- • The cap of the salt container is loose. side of the door. •...
ENVIRONMENTAL CONCERNS the symbol with the household waste. Return the Recycle the materials with the symbol . Put the product to your local recycling facility or contact packaging in applicable containers to recycle it. your municipal office. Help protect the environment and human health and to recycle waste of electrical and electronic appliances.