Something Not Working - Zanussi ZDS 679 EX Instruction Booklet

Dishwasher zds 679 ex
Table of Contents

Advertisement

Something not working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Force Centre, please carry out the
checks listed below.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the
cause of any problems.
All indicator lights on the control panel are off (except the indicator light of the phase under way), the
machine stops and a fault code appears in the display.
- press the "Start" pushbutton to reset the alarm and restart the wash programme.
If the fault code reappears in the display, before contacting your local Service Force Centre, carry out
the following suggested corrective actions:
Symptom
The machine will not start
The machine does not fill
with water
The filters are blocked
The dishwasher will not drain
General
The machine is noisy
The door is difficult to close
Fault code
Indicator light
water tap
flashes
Alarm A3
flashes in the digital
display
Alarm A6
flashes in the digital
display
Alarms A1, A2, A7
45
Solution
The door has not been properly closed
(open door indicator light flashes).
The plug is not properly inserted in the
power socket.
Check the plug fuse.
There is no current at the socket.
Ensure the water tap is open.
Ensure the mains water supply has not
been cut off.
The inlet hose may be squashed or bent.
Reposition the hose.
The inlet hose may be blocked.
Switch off the water supply, and clean
the filter.
Clean the filters, refer to "Maintenance
and cleaning".
The spray arms are not rotating. Ensure
the crockery is loaded correctly.
The drain hose may be squashed or
bent.
Reposition the hose.
The sink may be blocked. Clear any
blockages.
The drain hose extension is not correct.
Follow the instructions for connecting to
the waste.
There is no vent in the end of the drain
hose.
Switch off the dishwasher.
Switch it back on and start the
programme.
If the alarm reappears, call the local
Service Force Centre.
Dishes are rattling against each other,
refer to "Loading your machine".
The spray arms are knocking against the
dishes. Refer to "Loading your machine".
The dishwasher is not level, or not
properly built-in.
PSN08GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents