Related Manuals for Zanussi ZDS 699
Summary of Contents for Zanussi ZDS 699
- Page 1 LAVAVAJILLAS DISHWASHER ZDS 699 MANUAL DE INSTRUCCIONES INSTRUCTION BOOKLET 152988 96/0...
- Page 2 Warranty Card Certificate, on the back of which are written the relative conditions. Please fill in the necessary details on the Card Certificate and send it to the Zanussi Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Zanussi network centres).
-
Page 3: Table Of Contents
Contents For the user For the installer Important safety information Installation instruction Technical specifications Description of the appliance Water supply connections The control panel Water outlet hose connection Electrical connection Before use Setting the water softener Building-in Rinse aid Adjusting the height of the appliance Use of detergent The furniture door Fixing to the adjacent units... -
Page 4: Important Safety Information
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. -
Page 5: Description Of The Appliance
Description of the appliance IN84 1. Levelling spacers 9. Rinse aid dispenser 2. Upper basket stop 10. Central filter 3. Upper spray arm 11. Lower spray arm 4. Salt container 12. Upper basket 13. SID (detergent dispenser) 5. Large filter 6. -
Page 6: The Control Panel
The control panel 1. On/Off indicator light 4. "Programme selector" pushbutton This comes on when the On/Off pushbutton is depressed, indicating that the machine is on. To select the required programme press this pushbutton until the number corresponding to the chosen programme appears in the digital display 2. -
Page 7: Digital Display
6. "Economy drying" pushbutton Audible signals have been introduced to help indicate which operations the dishwasher is By pressing this pushbutton you can opt to performing. shorten or completely eliminate the hot air drying cycle, so making a considerable energy saving. Short "instruction accepted"... -
Page 8: Before Use
Before use Before using your dishwasher for the first time: 1. ensure that the electrical and water connections comply with the installation instructions 2. remove all packaging from inside the appliance 3. set the water softener 4. pour 1 litre of water inside the salt container and then fill with salt 5. -
Page 9: Filling With Salt
Filling with salt Only use salt specifically designed for use in dishwasher. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).This will prevent any grains of salt or salty water,... -
Page 10: Rinse Aid
Rinse aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. -
Page 11: Use Of Detergent
Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets. -
Page 12: Using Your Appliance
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket UI22 The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls,... -
Page 13: Adjusting The Height Of The Upper Basket
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. For taller items, the cup racks can be folded upwards. -
Page 14: Hints And Tips
Hints and tips To save energy Items not suitable for dishwashers: The following items should not be washed in Place dishes in the machine immediately after the dishwasher (unless they are sold as every meal and wait until the dishwasher is full dishwasher proof): before washing. -
Page 15: Hints For Test Centres
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard: EN 50242 Rerefrence programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage:... -
Page 16: Washing Programmes
Washing programmes Degree of soil Recommended quantity Programme Cycle of detergent and type of load in the description in the dispenser Any. 1 cold rinse (to avoid food scraps from Partial load (to be completed Rinse and Hold sticking together). later in the day). -
Page 17: Operating Sequence
Operating sequence Check the filters 8a. Setting and starting the Ensure they are clean and properly programme without "delay positioned (see "Maintenance and start" cleaning"). Press the "programme selector" pushbutton until in the digital display appears the number of the selected Press the On/Off pushbutton programme. - Page 18 8b. Setting and starting the 10. To cancel a programme in programme with "delay start" progress Once a programme and eventual options Press the "programme start" pushbutton for have been setted for the "delay start" 5 seconds to cancel the setting of the proceed as follows: programme under way.
-
Page 19: Maintenance And Cleaning
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter... -
Page 20: External Cleaning
Check that the SID is not clogged with detergent residue. If necessary, rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Refit the dispenser by following the above instructions in reverse order. Fasten it back onto the support by turning it clockwise. -
Page 21: Something Not Working
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. -
Page 22: Protection Against Flooding
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding Prod.No. -
Page 23: Installation Instruction
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS Width... -
Page 24: Water Supply Connections
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. -
Page 25: Water Outlet Hose Connection
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. -
Page 26: Building-In
Building-in This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. -
Page 27: The Furniture Door
The furniture door The door of this appliance is designed for the overlay of a panel having the following dimensions: Width 596 mm max Height * 50 - 120 mm max Thickness 20 mm max * The height of the panel depends on the height of II71 the kitchen plinth. -
Page 28: Noise Protection
Noise protection Adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted. Apply the protection as shown in the drawing, making sure that the non-adhesive section reaches right down to the floor. - Page 29 0 03/99...